Started on the right wing, Accomplished the following:
1. Cleocoed ribs to forward and rear spars and final drilled.
2. Removed ribs, and unibit the 13/16" conduit holes.
3. Etched and primed ribs.
4. Riveted ribs to forward and rear spars. Except for the inbrd most two ribs. To aid in bottom skin installation.
5. Mounted rt. wing skeleton in wing jig and clecoed on the top two skins. 
My buddy Enar stopped by and helped buck some spar/rib rivets.

1

1

1

1

| Back | Next | Home |