This page contains several items that are not in order of completion.



1     1
Fabricated flux valve mount for the right wing tip. Riveted mount to right wing tip.

  1   1  
   Fabricated an additional wire harness for the flux valve. This end connects to a connector at the sub panel. And an additional connector will get fabricated on the flux valve end when the wings are installed for good.




1
More wing tip fitting and installation.


 1
 Completed static and pitot plumbing.


1
Started wing tip fitting and installation.

1   1
Fabricated and installed the rudder links on the rudder pedals.

  1     1
Fabricated and installed the rudder stops.

  1   1  
Fitted empennage fiberglass tips and rudder bottom.

1   1
More rudder bottom fitting.

1

1

Trimmed and installed the lower empennage fairing strip.

1

Fitted and drilled empennage fairing.

  1  1
Trimmed, fitted and completed the wing tips.

1  1  1

Installed the AeroLed Nav, strobe and position lights.

1  1
Position light mount fairing is complete. Pics are out of order.

  1  1
Fabricated oil door with stiffeners.

1
More oil door stuff.

 1
More Nav light mount stuff. This pic shows how I feathered the inside for a clean fit on the wing tip.

1


| Back | Next | Home |